There’s just something about trains. The rumble under your feet, the horn echoing off the mesas, the way a passing train stops you in your tracks at a crossing.
For more than a century, the railroad has shaped the way New Mexico grew — our families, our jobs and the way we do business. That’s the idea behind All Aboard! New Mexico, a new KOB 4 series following the railroads that built our state.
The first episode marks a milestone. Twenty years ago, New Mexico wrote a brand new chapter of rail history: one rail line connecting the capital, our Pueblo communities and the heart of the Rio Grande Valley. That vision became the New Mexico Rail Runner Express, and in 2026 it’s celebrating 20 years of service. To mark the occasion, we rode all 100 miles of it — from Santa Fe to the end of the line in Belen.
A note on railroad safety: KOB 4 was given special access to get closer to locomotives and trains than anyone should without permission. Trespassing on railroad property is illegal and dangerous — and trains can’t stop on a dime.
Spikes, Steam and Statehood
Here’s something a lot of people don’t know: the railroad that made “Santa Fe” a household name never ran its main line through the capital city. To avoid the mountains, the tracks were laid south through Lamy, and Santa Fe was connected only by a short branch line.
To understand the Rail Runner, you have to go back about 150 years.
It started with a piece of iron only a few inches long. For more than a century, railroad spikes held New Mexico together.
Before the railroad, it took months for people, goods and services to move through New Mexico, east or west.
“After the railroad, it came down to less than a week,” said railroad historian Dave Traudt. “It was the thing that put New Mexico on the map as a modern state.”
In 1878, the Atchison, Topeka and Santa Fe — the first railroad in New Mexico — began its climb over Raton Pass, the gateway into New Mexico and the rest of the West. It was brutal work, but on the other side was a territory waiting to be connected to the world.
“The Raton Pass, in addition to Glorieta Pass, were two of the highest passes that traversed by Santa Fe Railroad,” Traudt said. “Starting in 1879, really was all mostly hand tools with a little bit of dynamite or explosives.”
Once the rails crossed the pass, they moved fast. By 1879, Las Vegas was one of the wildest boomtowns in New Mexico, thanks to the railroad. A year later, the main line reached Albuquerque. Railroad planners thought Old Town was old news, so a whole new town sprang up around the tracks — a split between “old town” and “new town” still visible in communities across the West.
In 1881, at a lonely spot called Deming, the Santa Fe met the Southern Pacific, driving a silver spike to complete the second transcontinental railroad in American history.
“The Santa Fe ran north and south of New Mexico, but also east and west, and particularly the West, they evolved into what was called the Santa Fe Transcon, which is what we know as the BNSF Transcon now, which is the largest railroad with container service in the United States,” Traudt said.
New Mexico wasn’t just on the railroad map anymore. It was the crossroads of it.
Albuquerque became a hub of that system. “The locomotive shops here were the largest employer for quite a while in Albuquerque, particularly and even in New Mexico as a state,” Traudt said.
For families living near the shops, the railroad set the rhythm of every day.
“Their alarm was actually the railroad whistle or the shop whistles, like okay, it’s time to get up, or it’s time for lunch, or now this is the time that the men are coming home,” said Alicia Romero, PhD, head curator at the Albuquerque Museum.
By the 1940s, diesel-electric power was taking over the Santa Fe main line, and one by one, the steam giants serviced in Albuquerque’s own backyard went quiet. But no matter what rolled over the rails — steam or diesel, freight or passengers — one thing never changed. Down in the ballast, the spikes driven by generations of New Mexicans never let go.
From Gridlock to Gleaming Rail Runner
Today, the Rail Runner offers views of New Mexico’s wildlife and landscape few people get from the road — and riders have taken about 16 million trips on it. How it came to be is one of the most ambitious, and most debated, stories in state history.
At the turn of the millennium, the Middle Rio Grande Valley had a problem: more people, more cars and only one interstate in each direction to carry them all. State leaders needed a solution, and some thought the answer wasn’t more highway lanes, but rails.
“We’re the only state in the West to make a major commitment to commuter rail,” then-Gov. Bill Richardson said at the time.
In 2003, commuter rail became the centerpiece of a massive state transportation package known as GRIP — Governor Richardson’s Investment Partnership. And here’s the part that still turns heads: New Mexico didn’t just lease time on someone else’s tracks. The state bought the railroad — miles of the old Santa Fe main line, now belonging to the people of New Mexico.
“The first goal that we will have is a train from Belen to the city of Bernalillo by the end of next year,” Richardson said.
It needed a name only this state could give it: the Rail Runner, after the state bird. The paint job matched — a roadrunner stretched down the side of every locomotive and passenger car, red, yellow and impossible to miss.
“The first time I saw the engines with that Railrunner stylized, you know, Roadrunner on it, I thought, man, this is really, really beautiful,” said Janice Convery, a former Rail Runner engineer and now the state coordinator for Operation Lifesaver New Mexico.
Service began on July 14, 2006, barely three years from idea to opening day. At the time, it was the fastest startup of a commuter rail system in the country in 25 years. In December 2008, after brand new track was built right down the middle of Interstate 25, the Rail Runner rolled into Santa Fe.
But big ideas came with big questions. The price tag climbed. Critics asked whether New Mexicans would really trade their cars for a train, and whether the state could afford to keep it running. Republican members of the legislature’s transportation committee raised concerns about the program’s costs in a letter to the state transportation department.
Through it all, the people running the railroad kept it rolling.
“From Rio Metro to Herzog and NMDOT, it’s really an incredible, and I would almost venture to say homegrown team,” Convery said.
Twenty years and millions of rides later, the proof pulls into the station every day.
The View from the Cab
From Sandia Pueblo through Bernalillo, Journal Center and Montaño, to the Alvarado Transportation Center in the heart of downtown Albuquerque, the Rail Runner passes through some of the busiest railroad crossings on its route. That means pedestrians, cars and people who don’t obey crossing signals.
The railroad always has the right of way — but not everybody gets that memo. And from high up in the cab of a locomotive, engineers see it all. Sometimes, it’s things they wish they never had to see.
Convery remembers one moment from her time in the cab.
“The gates were down, and a woman was on her cell phone, and I could see her, and she ended her call, and proceeded to walk under the activated gates in front of our engine,” she said.
It’s not rare. In 2025 alone, there were more than 2,000 crossing collisions across the country. Here in New Mexico, 12 people died trespassing on railroad property last year.
Part of the danger is that trains can fool us.
“We rely a lot on our senses, in particular our sight, to keep us safe in the world,” Convery said. “We can’t always tell the distance that a train is from us or the speed that it’s traveling at, and we don’t want to misjudge and cross without making doubly sure it’s safe to do so.”
And physics won’t negotiate. A train can’t swerve, and it can’t stop on a dime. By the time an engineer sees you, it’s often too late.
“Even if you had some distance, if you’re a freight train with 100 cars on it, going 50, 55 miles an hour, it’s going to take you a mile or so to stop that train,” Convery said. “Only thing they can do is put it into emergency and have all of the brakes on the train apply, and it rolls to a stop when it’s good and ready to roll to a stop.”
Keeping people off the tracks is only half the job. The other half is making sure the train itself doesn’t make a mistake. For that, Rail Runner crews have a tool in the cab called positive train control, or PTC. It keeps trains from colliding, from speeding and from entering work zones where crews are on the tracks.
But even the smartest technology can’t stop a driver from going around the crossing gates. That part of railroad safety is up to all of us.
Built in 1944… and Not Done Yet
Leaving Albuquerque, the Rail Runner passes the old Santa Fe Railway shops. For decades, the largest steam locomotives in the Santa Fe fleet were overhauled right here.
One of those iron horses never left town. The Santa Fe 2926 — New Mexico’s official state steam locomotive — is finally getting ready to come home.
It’s a passion project years in the making.
“From the time we pulled it out of the park, where it was for 43 years, it’s taken us more than 20 years to get it up and running the way she is now,” said John Taylor, historian for New Mexico Heritage Rail.
“It’s been a remarkable journey with a lot of stops and starts and wonderful people that have helped us along the way,” Taylor said.
The work started with the tender — the car behind the engine that carries its fuel and water.
“The tender is a much simpler machine than the engine, and so we had to take it apart. We had to clean out the tanks that hadn’t been cleaned for years,” Taylor said. “And then we turned on to the engine. The engine’s a much more complicated piece of equipment.”
Over the years, some pieces went missing — including during the restoration itself.
“We actually had some theft while we were restoring it, and had to remake parts such as the mountings for the cab, that were real expensive,” Taylor said. “People took it trying to get money for the metal, and we had to remake it. It was a lot more trouble for us than they probably got for six cents a pound steel.”
Keeping the locomotive running isn’t cheap, either.
“Oil, for example, not as expensive as diesel because we run on used motor oil, but you’re still paying for gallons, and this drinks up gallons. We even pay for the water, so it’s an expensive thing to operate,” Taylor said. “But you know, it’s such a symbol of New Mexico history, and our mission statement is about education.”
New Mexico Heritage Rail sees about 2,000 visitors a year and relies on donations to keep the 2926 going.
“New Mexico is a very historical state, and this locomotive represents one of the most important aspects of that history,” Taylor said.
End of the Line… For Now
Plans to establish a new regional rail line in Colorado have officially left the station and could one day involve New Mexico.
Last week, Colorado Gov. Jared Polis revealed “COCO” as the name for the state’s new Front Range Passenger Rail Service Project. The plans include future connections to Trinidad, Colorado, and New Mexico.
The New Mexico Department of Transportation stated that while those plans are still in the works, with Colorado’s new passenger rail service still several years, they have some short-term ideas to improve rail service in the Land of Enchantment. In fact, NMDOT recently released its 20-year state rail plan.
“These are the projects and priorities we’ve identified to keep the rail system safe, efficient and reliable; and also to support economic development throughout the state,” said David Harris, executive director of modal operations for NMDOT.
The plan calls for safety projects, including bridge replacements and road-grade separations. It also proposes new freight lines to San Juan and Lea counties, the Santa Teresa border crossing and Spaceport America.
“It’s just the type of thing that could really create a huge incubator and a seed that creates other economic development,” Harris said.
Expanding passenger rail service is also a focus, starting with increasing the reliability and frequency of both Amtrak routes that cross New Mexico.
“Making that Sunset Limited a daily train rather than the three times per week. Maybe the Southwest Chief could be twice a day,” Harris said.
The plan explicitly stated there are no plans to expand the Rail Runner train. However, additional tracks and train sets could reduce bottlenecks.
As for new passenger service, the plan highlights two longstanding ideas: A commuter line between Las Cruces and El Paso and an inner-city line between El Paso, Albuquerque and Denver. The inner-city line has already been studied on the federal level.
“That route wasn’t as competitive as a lot of the other routes that were sort of rising to the top,” Harris said.
Although, the rail plan suggests Colorado’s Front Range Project could get those wheels turning.
“That would be something we’d look at when the time comes,” Harris said. “They’re looking to build that framework and that spine in their community with a commuter rail that New Mexico has had.
NMDOT leaders say it will take millions of dollars in funding to make many of these projects a reality. However, having a plan like this in place should make it easier to get the federal government to chip in.
The safety projects are the first priority and there’s already movement on some of those new freight lines. It seems as though it could be a while until we see any new passenger services but it is promising to see them included in this 20-year plan.
- For Related Stories: All Aboard! New Mexico Hawker Vanguard